Urethane alkyd based, single component, glossy parquet polish. It is used to protect wooden and parquet surfaces from chemical and physical effects. It forms a film coat on the surfaces it is applied, protecting the surface from tea, coffee, alcohol, oil, detergent, etc.
It is a varnish than can be safely used on surfaces that require strength, such as parquets, stairs, floor tiles and mosaics.
The surface of application must be scraped, and any dirt and dust must be wiped away. The surface to be applied with Yalaz Parquet Polish must be clean and dry. If, following the scraping, a coat of Yalaz Parquet Polish is applied to prevent wood from darkening and waited for more than 24 hours, the surface should be lightly sanded, mattified and wiped. The product can be applied in 3-4 coats, depending on the desired result. Wait for 5-6 hours in between the coats. Please make sure that the temperature of the surface of application and ambient temperature are minimum +10°C during application.
Apply without diluting in case of using a brush or a roller, and dilute with Yalaz Synthetic Thinner by 10% in case of using a sprayer.
1 liter of product covers a surface of 10-12 m2 in a single coat depending on the method of application and the surface.
(20°C):
Touch Dry: 2-3 hours.
Dust Dry: 5-6 hours.
Suitable for Sanding: 10 hours
Suitable for Walking: 24 hours
Hard Dry: 72 Hours.
It can be stored in its sealed original packaging for 2 years in a closed environment with no direct sunlight at a temperature of +5°C to +35°C. Protect from frost.
Packaging
0.75 L / 2.5 L / 12 L
Alkyd resin based, air drying topcoat paint. It is a topcoat paint with high lightfastness and hide, which dries fast in air. It adheres quite well on bare metal surfaces and creates an elastic film. In case of applying on a primer, it creates system
Nitro-cellulose and alkyd resin based, air drying, single component, cellulosic based and filler varnish that fills the cavities and pores of wooden surfaces, is sanded easily and is used to prepare the surface for topcoat applications.
Two-component, polyurethane based, reaction curing, very glossy topcoat paint that gives a glossy finish. It provides for a filled finish. It is resistant to scratches, impacts, discoloration and domestic chemicals.
Acrylic copolymer emulsion based, exterior wall topcoat paint with excellent hide and matt appearance.
Acrylic resin based, single component, glossy topcoat paint. It is a paint with elasticity, chemical resistance and high UV resistance. It may be applied on any metal components.
Two-component, polyurethane based, reaction curing, topcoat paint. It forms a hard and elastic fil. It is resistant to scratches, impacts and discoloration. It is applied on panel door surfaces primed with Polyurethane Primer and properly sanded.
Water-based, acrylic copolymer binder based, high hide latex paint with extra matt and smooth appearance. It does not crack, blister or peel off.
Synthetic alkyd resin based primer that is used for priming wooden, chipboard, metal and plastered surfaces, which leaves no brush marks.