Technical Documents
Construction Group
Royal Silicone Exterior Wall
Acrylic emulsion based, excellent adhesion thanks to its special composition, silicone added exterior wall paint with excellent spread, high hide and easy application. It is resistant to any atmospheric conditions. It expels the moisture in the wall thanks to its breathability.
Product Information
PROPERTIES
- Excellent hide
- Resistant to atmospheric conditions, pollution, sunrays, abrasion and impacts.
- Its silicone texture expels the moisture in the walls without retention. This way, the paint coat protects itself from the harmful effects of salt water vapor.
- It does not fade, crack, blister and peel off.
- It is easy to apply thanks to its high spread on surface and saves from time and labor.
- It does not give off an unpleasant odor during application.
APPLICATION SURFACES
It is safely applied on any rendering, exposed concrete, autoclaved aerated concrete, brick, and other construction materials.
APPLICATION METHOD
Application 1: The surface of application must be sturdy, dry and clean. Dirty, dusty and previously painted surfaces must be scraped off and cleaned and any surface defects should be corrected with putty. A single coat of silicone exterior wall primer or insulating primer should be applied on the surface.
Application 2: 2-4 hours after application of primer, Yalaz Silicone Exterior Wall Paint is diluted with water by 10-20% in volume and applied in two coats on the surface using a brush or roller. Wait for 3 hours in between the coats.
Dilution / Mixing Ratio
Dilute with water by 10-20%.
Paintable (Coverable) Area
1 liter of paint covers a surface of 10-12 m2 in a single coat depending on the method of application and surface.
Drying Time
(20ºC)
First Dry: 15 hours
Recoat: 2 hours
Hard Dry: 24 hours
Storage
It can be stored for 2 years at a temperature of +5°C to +35°C in its original packaging, in a closed environment with no direct sunlight. Protect from frost.
