Technical Documents
Road Marking Paints
Reflector Road Line Paint
Chlorinated rubber modified alkyd resin based, fast drying paint that contains pigments facilitating night vision and reflecting light back in dark environments.
Product Information
PROPERTIES
- Strong adhesion properties.
- High abrasion resistance.
- Resistant to salt water and chemicals.
- Fast drying.
- Flexible structure.
APPLICATION SURFACES
It is safely used for application of traffic markings at bus stops, parking lots, crosswalks, pavements, car parks, tennis courts and any concrete and asphalt covered road surfaces.
APPLICATION METHOD
Surfaces of application must be cleaned off of dust, dirt, oil and moisture. The paint must be stirred well before use. Reflector Road Line Paint is diluted by 5-10% and applied on the readied surface using a brush, a roller or a paint sprayer. At the time of application, ambient temperature should be higher than 10°C. Dilution is not required in case of applications at 60-70°C. In case of double coating, wait for 30 minutes in between the coats.
Dilution / Mixing Ratio
It is ready to use..
Paintable (Coverable) Area
1 kg of paint covers a surface of 4-5 m² depending on surface conditions.
Drying Time
Dust Dry: 5 minutes.
Touch Dry: 10 minutes.
Hard Dry: 40-80 minutes.
Storage
It can be stored at +5 to +35°C without direct sunlight for 1 year in its original sealed packaging. Protect from extremely high temperatures and humidity.
Packaging
3 kg / 20 kg
