Technical Documents
Construction Group
Exterior Wall Primer – Silicone
Acrylic copolymer emulsion-based topcoat exterior wall primer. It acts as a binding bridge between the paint and the surface and decreases paint consumption. It provides integrity with topcoat paints thanks to its composition. It expels the moisture inside the composition thanks to its breathability. It prevents the surface from unevenly absorbing the paint to be applied on top of the primer.
Product Information
PROPERTIES
- Builds a binding bridge between the paint and the surface.
- Decreases paint consumption.
- Considerably prevents water and moisture permeance.
- Prevents growth of moss and bacteria.
- Prevents the surface from unevenly absorbing the paint to be applied on top of the primer.
- Increases the durability of paint.
APPLICATION SURFACES
It is applied as a primer before topcoat paint on any concrete, autoclaved aerated concrete, brick, plaster and similar mineral surfaces on which exterior wall paint will be applied and on silicate or acrylic based paints that have discolored.
APPLICATION METHOD
Application surfaces must be sturdy, clean and dry. Loose plaster particles on the surface should be sanded or ground. It should be applied in a single coat using a brush, a roller or a sprayer and diluted with water by 5-10% depending on the application.
Dilution / Mixing Ratio
Diluted with water by 5-10%.
Paintable (Coverable) Area
1 liter of primer covers a surface of 12-14 m2 in a single coat depending on the method of application and the surface.
Drying Time
(20°C) Topcoat Paint Application: 6 hours.
Storage
It can be stored for two years at a temperature of +5°C to +35°C in its original packaging with no direct sunlight. Protect from extremely high temperatures, humidity and frost.
Packaging
3.5 kg / 10 kg / 20 kg
