TECHNICAL SUPPORT

Yalaz Paints & Coatings reaches its customers with its technical staff equipped with the knowledge to present the most suitable solutions to the customer for determination of the sort of coating to be used, using it and application, taking the customers’ expectations into account and presents its products to the last customer directly.

 

 

 

1-When to Paint brush, roller when I take it?
In general, large surfaces (walls), roll is faster and easier to work with. Mesh walls, doors, windows, etc.. Always brush in the painting of wood is needed. To make a generalization, if necessary, water-based paints for synthetic brushes, natural bristles for oil painting brushes, rough and decorative surfaces to create a long-haired roller, flat surface for a short haired roller is available.
2-How to Brushes of longevity can be achieved?
The location of the painting may require a few different size brushes. Quality brushes, painting process is important for the results. Hair ends at the same level, should be considered to be soft and flexible. Before using the new brushes washed with detergent and water tends to shed hair loss should be provided. After painting with a brush that you use must be cleaned of paint solvent and then washed with detergent and water should be established. Brush, wrapped in a paper to be stored for reuse.
3-paint on the wall by trying to trick voters are?
Easier to decide where you will be painted the color of the field for the application to be made at least 1 m2lik. The location should be taken into consideration the light of the situation. At what time of day can be found in the circumstances under which interest can be thought of assessment should be made accordingly. Some colors in natural light and electric light appears completely different. The items in the selected color space to adapt to the painted area around whether people prefer goods made should be considered.
4-how must be prepared to paint walls?
Give good results in the application of the front surface preparation is very important. Easy and durable surface for painting the ruins of the old paint and paper be removed, the surface can be abrasive dust which must be deleted. Dirt and stains with detergent and water should be dry cleaned this part. Small cracks and holes should be filled with putty and then an appropriate application of primer to all surfaces must be made. After the paint is not dry primer application.
5-wall edges of the main part of whether you should be painted before?
Joints and edges of the walls purpose-finger roll or brush should be painted, then move on to the surface should be large with large rolls. Eğerkenarlarda nap brush is used, which monitors large rolls lightly with the poll can be scanned. Applications to be in the same direction makes the image even more beautiful.
6-Water-based and solvent-based paint is?
Water-based paints are thinned with water, solvents and paints are solvent-based paints are being investigated.
7-Water-based and solvent-based paint between the results of implementing What is the difference?
Solvent-based paint by creating a thick film layer, minimizes the wall to breathe. Water-based paint, this is just the opposite. Solvent-based paint in a more polished look, and paint for a short time later, leaving the smell of paint used on the floor. Water-based paint is odorless.
8-Dye what should be observed before applying?
Application surface must be cleaned thoroughly to make the necessary repairs should be done and must be free from dust. Before being mixed and the required rate of paint should be studied.
9-How to paint should be stored Ascendant?
Increasing according to the type of paint, (inside the paint container to cut off contact with the air) water is water based, solvent based, solvent is added can be stored for a long time.
10-How to be cleaned instruments used in the paint process?
Water-based paint used for instruments cleaned with water, solvent based paint used for instruments cleaned with solvent to dry naturally be provided.
11-Environmental temperature, paint application, Is there an impact?
Especially in the open air of the applications +5 º Cden high, must be quite dry and windless. Closed areas of the state of the environment, can cause the paint to dry late or early.
12-paint, with a liter to measure whether the weight is more accurate?
Paint, fluid and fluid for a material that is the unit of measurement of the liters. Paint that is important in the field is the amount of 1 liter of paint. Weight calculations over the same genus as well as different colors of paint to make the wrong calculation causes. This is because each paint color of the genus and the specific gravity is different.
13-Paint the given rates than what consequences will be diluted?
Paint is applied to the surface of the cover and adhesion is reduced. This should make the paint will reduce the impact of protection and decorative functions.
14-Paint which should be evaluated in money?
Written on the packaging and technical bulletins rates should be investigated. Each painting has a different thinning rate. In addition, thinning rate, to be used varies according to the characteristics of the application tools.
15-Paint has the distinction of being Is it flammable?
Water-based paints are not flammable. Solvent-based paints are flammable and polished.
16-How to Paint should be stored?
Dyes used in fully enclosed containers, packaging unopened they paint dry, at room temperature, and pallets (to cut off contact with the ground) must be stored on.
17-polka dots and how to get rid of the blackened surface of the painting is?
Oil, soot, pencil, burn marks, stains, etc. to destroy the institution of any dyeing process can not provide adequate performance. Vomiting after a while all the spots do. Therefore, before you paint spots should be a process that can prevent vomiting again.
18-Moisture causes occurs?
There are two reasons moisture formation: Negative water pressure and the positive water pressure.
What is 19-negative water pressure?
From soil, water coming from the roof or around the entries made in case of formed insulation against moisture is adequate. Surfaces, plaster-wall after a certain amount of moisture that occurred during the blistering paint, pour and mold-causing bacteria.
20-negative water pressure due to the damp surface paint application to be considered in the case are the points?
In case of paint applied to damp surfaces need to be considered some of the points: 1 Plaster surfaces should be scraped up. 2. Which places should be slightly wet dry, dry places that should be dampened slightly. 3. Local interventions, but to paint a large area as possible should be applied.
21-What is positive water pressure?
Environmental problems caused by the source of moisture is called the positive water pressure. Kitchen, bathroom, dining room, such as water vapor in environments where this problem occurs intensively. Water into water vapor returning concentrating again, making the walls damp and after a certain time, mold and bacteria on the surface occurs, the decision of the paint of the swell and fall is seen.
22-The first primer is why?
The first primer, errors, and the old surface has been plastered with the new surface should be applied strictly. This application, on the surface of the solid and future healing ensures better adhesion of paint film. Be absorbed by capillary cracks on the surface will increase the protection and reduce the amount of paint to be done over.
23-Why use Ara primer?
Synthetic paint systems are used. Be absorbed by the surface of the paint finish on the surface which prevents fluctuation. In addition, ensures better adhesion of the topcoat.
24-Putty why is it used?
The sole purpose of the use of toothpaste properly surface.
25-Drying can be and how preventable causes?
Paint the surface of the fat, dirty and wet is the environment not be ventilated enough, not enough oxygen in the atmosphere does not exist, the air temperature and humidity, lack of appropriate conditions, paint thinner into the wrong institution to join, and the balance in cases of corruption can be drying. This is a problem usually encountered in synthetic-based paint. Synthetic-based paints and dry oxidation. In the structure, solvent (thinner of the) structure of oxygen to evaporate and enter the water-based paints for a longer time than is needed. Therefore, the application must be made in accordance with label information. Also used as a synthetic, synthetic thinner paint thinner instead of naphtha, kerosene, solvents, such as cellulose thinners should not be used. This type of solvents, paints and disrupt the binding structure, as well as through drying problem, causes many problems. Late on the surface of the drying problems experienced, and expect to perform the full install, this time composed of dust and abrasive particles made from the media and away from the manufacturers specified conditions within the re-painting is required.
26-metal surface should be aware of what the painting?
Metal surfaces, react with oxygen in the air after a certain period as a result of oxidation-reduction reactions are corroded. Result of this reaction, known as rust, paint film is broken up over time. This is certainly reason to metal surfaces with oxygen for cutting theme, applying 2 coats of primer to prevent corrosion is required. Then slip surface finish should be applied synthetic dyes. Galvanized, aluminum and copper surfaces painted in the synthetic process is not a painting system, a problem occurs if bond.
What should be done according to 27-Paint selection?
First paint the naked eye should be examined. Then stained to determine a place and not do indoors, outdoors or two of you together? The next step is to choose the kind of paint. After that will be painted surface and accordingly will be large-lüğü amount of paint should be determined.
28-Paint is usually based on how many years?
Quality and the necessary number of coats of the paint, make repairs when necessary and appropriate surface, good workmanship, if applied generally is based on 5-6 years.
29-Paint should be applied several times?
And the previous paint color depending on the condition of the surface, but usually 2-3 times is enough.
30-new painted a house, should be kept empty for a while Is it?
The smell of paint will be at home for a while but is not necessary to empty the house. Windows and doors be kept open will help to diffuse the scent. In any case, the smell of paint will not stay more than 2-3 days.
31-Paint type are installed according to the time?
Drying time, and applied to the type of paint is applied varies according to the number of times.
32-new painted walls stay clean How is?
From time to time on the walls of dust can be cleaned with a brush. With a soapy sponge on the stains can be removed. Cleaning process is done alone should not be too much punishment should be careful not to damage the paint.
33-Paint and stained tooth causes appear?
Ragged and stained image of the last times the previous level to the implementation of the tooth surface, a top coat instead of the previous times did not fit in, have not established a good primer on the last floor to properly apply the thick paste or layer implementation can occur.
34-What is Enamel?
Water or oil based, stain-and non-washable, the most important feature to create a smooth, hard surface finish is the application materials. In general, demand is very bright, although there are as dull ones.
35-How the molds on the surface should be removed?
The entire mold surface, or prepared with a mixture (a volume of washing water, three bodies of water) or be ready with a chemical substance must be removed by rubbing. Then rinse the surface with plenty of water and leave to dry should be. Dry surface does not dry new paint should be applied immediately.
36-Natural bristled brushes to do is to use synthetic bristled brush do?
What type of paint you use is very relevant. Both types of oil-based size can also be used. Synthetic latex or acrylic paints only bristled brushes should be used. (Latex or acrylic paint in the water takes natural hair oil, and thus the use of natural hair becomes very difficult.)
37-A latex paint, alkyd enamel can be applied on?
Latex paints usually without an adequate surface preparation process, ie grinding, without cleaning can not be applied over alkyd enamel.
38-floor wall to prevent moisture from penetrating Is there any paint?
In Portland cement containing products can be used in the wall of water as a means of sealing. But too much moisture leakage, such as walls to block off the steam relief may require different measures to be taken.
39-What is the best exterior paint: acrylic alkyd?
100% acrylic top coat for color and flexibility in terms of loss prevention is the best choice. However, vomiting makes wood surfaces before applying oil-based acrylic solid a front-end application layer is very important. Vomiting surfaces will make the system fully available acrylic painting.
40-Exterior surfaces are painted chalk Why?
Normally be acceptable to some degree of chalk. Some paint manufacturers that the paint removal process itself is seen as what they are saying. But as well as to wash off the lot, may be too heavy chalk. More of chalk, wash with the disintegration of the weather occurs. Among the causes of some common chalk inappropriately applied to the surface, to take extra paint or use can be considered of poor quality paint. All this combined with bad weather causes the paint chalk.
41-painting can be done in the cool air?
Most latex or acrylic paints, the temperature falls below 10 ° C whenever it should not be applied. Alkyd / oil based paints can be applied in temperatures of up to 5 ° C.
42-Direct sunlight is not recommended because the paint to make?
Paints, to provide a smooth processing and adhesion after the application has to stay wet for a while. The temperature of direct sunlight, the outermost layer of paint to dry before completing a more mature healing causes. This causes bubbles on the paint.
43-outer surface of the wood which causes swelling and peeling is the most basic?
The most basic reason is moisture. However, swelling, applying paint under direct sunlight, inadequate surface preparation or the use of low-quality paint may also occur.
44-Aluminum can be painted or vinyl yanlık?
Yanlık vinyl or aluminum, surface clean and dry as long as 100% hit without lining can be painted with acrylic paint. Exposed to outdoor aluminum finish before applying acrylic and oil-based primer coatings should be cleaned. Selected paint when painted vinyl yanlık darker than the original color should be sure. Because dark colors absorb sunlight, and this warped and twisted may.
45-Fence and deck wood surfaces, such as what kind of coating is suitable for?
Most deck, is made of timber was pressurized. Horizontal surfaces, especially because so many people walking on the spot if no more is seen. But standing on surfaces or in fence painting process is almost arbitrary. Wood before painting the water absorption capacity, should be controlled by spraying water on. If the particles in the water stay on the surface, the paint will not penetrate the wood. If the surface is new, wait 30 days and the same process must be repeated. If the surface is not new, thoroughly cleaned and ready to be painted.
46-old and a brush on the dried paint can be used again to make is how?
Dried latex paint, the brush is cleaned out and kept in alcohol can be removed. The oil-based paint brush for the job after being kept in special chemicals produced can be removed.
47-What size should be in the brush to be used?
According to the size of the surface will be in place to decide. Length of the brush surface is used to grow will grow. Most importantly, easy to use but still is to select the brush.
48-What kind of decorative paint applications sponge should be used?
Natural sea sponges after application leaves a great image. However, this can not be said for artificial sponges.
49-Wood-covered ground of what attention should be painted in?
Due to temperature differences and board expansion, contraction, and this will damage the paint. Moreover, where the wood coatings, traffic will be focused on for a walk, many tend to wear out. Therefore, a separate primer and putty phase should be done with care and attention.
50-Is it possible to completely get rid of Mold?
No. Mold dark, humid and the air flow is less than can occur anywhere. Paints to prevent mold formation fomüle after a while the paint is still on despite mold is observed. Clean, do the best process.
51-new painted walls and dirt stains for which can be done?
To clear the new paint has been applied for at least two weeks (but much better than four weeks) is necessary to wait. Using a soft cloth or sponge, prepared the wall with soap and water can be deleted. Aqueous cleaning is done more in the wall, leaving traces of water can flow. Also, if you clean a water wall, an invisible chemical substance has been mixed over whether or not damage the paint must be controlled.
52-painted surfaces caused minor distortion how interventions should be?
To get the best results in this small intervention is desired, the same as the original paint application methods should be used. Should be very careful to use the original paint. A very thin coat should be thinned 25-50%. When the same humidity and temperature values in the original painting to make the application much more would be appropriate.
53-Exterior paint applications is the importance of the second floor?
Second coat of paint, the paint layer thickens naturally, and this increases the resistance of paint to external factors.
54-Paint is being done to prevent overlapping traces how?
Small small areas being painted, get a new paint brush while the paint to dry on the surface is blocked, which prevents monitored.
A coat of paint is applied using 55-More, you are better than two times?
No, because the dye can not penetrate the surface and good adhesion can not.
56-Exterior paint applications are the most appropriate conditions?
Humidity below 85%, temperature or 10 ° C and 40 ° C should be between.
57-Very hot weather in the mind of paint is applied?
In very hot weather and without sticking to the paint surface dries before penetration. This will result with the paint peeling and blistering.
58-The exterior of the existing latex paint over alkyd paint recommended implementation?
Generally not recommended. As time goes on, but the bottom floor will become tough alkyd latex floor will always remain flexible. Latex paint at times Ilerleyen will be subject to expansion and contraction. This alkyd over latex layer to prevent sticking, so alkyd layer will consist of peeling and cracking.
59-How long after the paint can be applied after it rains?
In fact, it will be painted surface is a case about how wet. In such a case, stone or wood surface may be too wet. To apply the paint, rain is recommended to wait a day after the minimum. But the most important criterion is to make sure surface is completely dry. Will remain on the surface moisture, the paint peeling problem as absorbed give birth to avoid.
60-acrylic latex paint diluted with water is turned what happens? Does the reduced strength of dye?
Paint with water when the paint solid content are being viewed will be thinned. As a result, a film layer as thick as paint can not create as requested. The thickness of the paint film is very important for durability, these paints are performing worse than expected. Paint, shutdown feature can be lost.
61-The exterior color in which the later solar?
First, all the paints used in the exterior wall of the left over time they do. However, this left the amount of color from the color of the paint from the paint change. Organic colors such as blue and green, brown and yellow color as compared to inorganic tend to more quickly fading. In addition, high-quality acrylic latex paints, solvent based paint compared to better maintain their color. Meanwhile, between exterior and interior painting is one of the biggest difference, the color of exterior paint is more able to maintain.
62-Galvanized surfaces which paint gives the best results?
Six months left in the open air until the surface has been galvanized or chemicals after cleaning, two floors directly to the acrylic latex paint or metal primer on the metal surface can be applied. The above actions are not without paint application, zinc reacts with the oil causes the paint to peel.
63-alkyd and latex drying time is the difference between?
Latex paint dries within an hour and can be cleaned with water. Alkyd paint dries in a day and can be cleaned with solvent.
64-Oil-based paints have become hard and brittle over time. Acrylic latex paint in the same way you act?
No. Acrylic latex paint particles adhere to each other by a flexible film form. This expansion and contraction with the surface layer is. This incredible durability paint. Oil-based paint, as a result of chemical reactions during the life of a fixed film creates. As a result of this reaction becomes hard and brittle paint. This will lead to cracking and crusting.
65-new painted surface caused fissures in the form?
This is the most important cause of cracking, in need of a thick layer of paint is to apply. The floor and lower floor surface to dry more quickly than dry takes a long time. Lower floor is dry, and that when shrinkage causes cracks in the upper floors. In addition, this paint is applied to the surface is not cleaned well may be a reason.
In general, large surfaces (walls), roll is faster and easier to work with. Mesh walls, doors, windows, etc.. Always brush in the painting of wood is needed. To make a generalization, if necessary, water-based paints for synthetic brushes, natural bristles for oil painting brushes, rough and decorative surfaces to create a long-haired roller, flat surface for a short haired roller is available.